Microsoft
Selection procedure and interview questions of Microsoft at Dhirubhai Ambani Institute of Information and Communication Technology (DA-IICT)
There were 4 rounds for selection procedure. First round was a written test, second round was group interview and 3rd and 4th rounds were technical interview. Each round had eliminations. Total 143 students were eligible for written test and 16 students were selected for the next round, ie. group interview. Only 8 students were able to go for 3rd round of technical interview. In 3rd round 4 more students were eliminated and remaining 4 students went for final round of technical interview. Only 1 student got an offer finally from Microsoft.
Following is the detail about each round.
Note: All examples which I will give here are just for your understanding. Interviewer was not giving any examples. Hardly 2 – 3 time interviewer gave examples.
Round 1: Written test
Paper style: 3 subjective questions
Time limit: 1½ hour
Question 1: Finding output....
It was string cruncher program. First remove all repeated consecutive substring with length 1, then delete substring of length 2 and so on...
Example : string is “abcabeccced”
After removing repeated substring of length 1: “abcababceccced” --> “abcababceced” (2 'c' are removed)
After removing repeated substring of length 2: “abcababceced” --> “abcabceced” (substring “ab” is removed)
and so on...
Question 2: Writing a program.
Definition: You are given 3 integer arrays A, B and C of length n1, n2 and n3 respectively. All arrays are sorted. We define triplet of these 3 arrays as (x,y,z) where x is any integer from A, y from B and z from C. We define distance of triplet as maximum difference among triplet elements, i.e. Maximum of x – y, y – z or z – x. Write a program to find minimum triplet distance. (means there are n1*n2*n3 number of possible triplets are possible...among all triplets which triplet has minimum distance...Give only distance, but not triplet elements). Your program must be as much efficient as possible.
Question 3: Writing program.
Definition: You are given 2 integer numbers in linked list form. Add those 2 numbers.
Example: First number is 234 and second number is 35. So, you are provided with 2 linked lists 2->3->4 and 3->5. Your answer must be 2->6->9. (Make sure to take care of carry number). This example was given in paper.
Round 2: Group Interview
All candidates who had cleared the written test were called for group interview. Here we were given 3 problems one by one. Time limit was between 15 to 20 minutes. Once they gave problem definition we were supposed to think on it and discuss our ideas and logic about solving that problem with one of the representatives from Microsoft. Once that representative was convinced with our logic then we had to write code for that problem on paper.
Problem 1: You are given a string. Develop a function to remove duplicate characters from that string. String could be of any length. Your algorithm must be in space. If you wish you can use constant size extra space which is not dependent any how on string size. Your algorithm must be of complexity of O(n). Example: Given string is BANANAS. Output must be BANS. All repeated characters are removed.
Problem 2: You have a tree and address of its root. Write an efficient program to test whether a given tree is Binary search Tree or not. (Hint: In-order traversal of binary search tree is sorted in increasing order. Use this property to develop program)
Problem 3: You have 2 sorted lists and a function that merge that 2 lists such that output is again sorted and duplicates are removed. That means output is union of those 2 lists in sorted form.
Example: First list is 2->3->5->6->8 and second list is 4->5->6->7 and output of function is 2->3->4->5->6->7->8.
Develop test cases to test given function such that your test cases ensures that given function works for every situation. That is if inputs are valid then it gives proper output in any case or otherwise it shows error message.
Round 3: First Technical Interview
All those who had cleared group interview were called for first technical interview. They were taking minimum 2 hours for first interview. Some of us also faced interview for 3 or more hours.
Round 4: Second Technical Interview
All those who had cleared first technical interview were called for second interview. This was last round of interview. They took 1½ to 2 hours for this second interview.
I don't remember all the questions which were asked to me in both interviews. But still some of the questions which I can remember (almost 80 to 90% questions) are listed below.
In both interview they ask questions from C/C++, java, OS, Data structure and algorithms, Microprocessors and compiler constructions. With this, they also asked me to develop more than 6 to 8 programs. You can develop all programs in 5 to 7 minutes. But after writing program they asked to find its complexity and try to reduce the complexity and write the program again. In this way it took almost 15 to 20 min for each program. Some took less than 15 minutes also.
Some of the interview questions are as follows:
You are given a linked list and block size k. Reverse block of size k from list.
For example you are given linked list of 1000 nodes and block size is 5 then instead of reversing whole list, reverse first 5 elements, then 6 to 10 elements, then 11 to 15 elements, and so on...You have singly linked list and your algorithm which you will implement must be in space, that is no extra space is allowed.
You are given a tree and any 2 nodes of that tree. Find common parent of both nodes. Develop as much efficient program as you can.
In unix there is a command called “tail”. Implement that command in C.
Some questions about race condition (OS)
Questions related to semaphores.
Questions related to mutex. Applications of mutex. How to implement mutex in OS?
Questions about Critical region (OS).
How to ensure that race condition doesn't occur. Give your view as you are OS designer.
How to ensure that each process lock the critical region before they enter in it. As OS designer How will you force the process to do this?
Questions on IPC
Questions on Shared memory and Message passing mechanism.
Difference between system call and API call
How system call works? What happens when system call is invoked?
Different types of system calls?
Some questions from microprocessor. About Interrupts
Types of Interrupts. What happened when interrupt is called?
You are given a hard copy of a program which contains some errors. Your job is to find all types of errors from it. And discuss why is it an error. Write correct program for the same.
You are given a linked list and a number n. You also have a function to delete all nodes from that list which are at position which multiple of n in the list.
Example: if number is 3 then delete 3rd, 6th, 9th ,...nodes form the list. Develop a program that tests whether given function works properly or not. (In short they are asking me to develop general program for all test cases. By running that program all tests can be performed.)
Questions on java. Exception handling
Need of catch and finally block in java exception handling..
How will you create your own exception.. Explain with example.
Some questions on compiler construction. What is parser? What is input to the parser and what is output of parser? Difference between top down and bottom up parser.
F(1) = 1.
F(2n) = F (n) and F(2n+1) = F(n) + F(n+1).
Develop recursive program.
You are given a string which contains some special characters. You also have set of special characters. You are given other string (call it as pattern string). Your job is to write a program to replace each special characters in given string by pattern string. You are not allowed to create new resulting string. You need to allocate some new memory to given existing string but constraint is you can only allocate memory one time. Allocate memory exactly what you need not more not less.
Assume that your friend is writing a book . He gives you a file that contains that book. Your job is to develop an algorithm for indexing of that book. In every book there is one index at end which contains some words which are not there in normal vocabulary dictionary. It also contains page number for reference. You can use any data structure you want. You need to justify why you have used that data structure and also need to justify your logic.
Question from my B.E. final semester project. Asked me to explain whole project.
Question from everything written on my resume.
Question from my every project I did. They asked me to explain each project and then how to do some modification? That modification will be suggested by interviewer himself.
My experience in Teaching assistantship.
They had my written test answer sheet. They opened it and asked me to explain why I gave that output or why I implement that logic. How did I arrive to that solution which I had written in answer sheet.
In written test, for second question I had implement a program which was not much efficient. During interview they ask me to optimize my program. They also gave hint to optimize it.
During group interview, in second problem I was only able to discuss logic I was unable to develop program in given time limit. Interviewer knew this. She asked me to develop that program during interview.
Which is your favorite software tool? If you are allowed to add any feature in it which feature you will add?
Which is your favorite subject? Some questions from that subject.
Something about yourself , your hobbies, interests, strengths and weakness.
I was unable to clear 4th round that is second technical interview. I hope this will help you in your preparation for Microsoft
(3 votes)
The following are actual
The following are actual questions from actual interviews conducted by
Microsoft employees on the main campus. Microsoft Consultants are
sometimes allowed to have a life, so questions asked of them during
interviews don't really count and aren't listed.
The questions tend to follow some basic themes:
Riddles
Algorithms
Applications
Thinkers
Riddles
Why is a manhole cover round?
How many cars are there in the USA? (A popular variant is "How many gas
stations are there in the USA?")
How many manhole covers are there in the USA?
You've got someone working for you for seven days and a gold bar to pay
them. The gold bar is segmented into seven connected pieces. You must
give them a piece of gold at the end of every day. If you are only
allowed to make two breaks in the gold bar, how do you pay your worker?
One train leaves Los Angeles at 15mph heading for New York. Another
train leaves from New York at 20mph heading for Los Angeles on the same
track. If a bird, flying at 25mph, leaves from Los Angeles at the same
time as the train and flies back and forth between the two trains until
they collide, how far will the bird have traveled?
Imagine a disk spinning like a record player turn table. Half of the
disk is black and the other is white. Assume you have an unlimited
number
of color sensors. How many sensors would you have to place around the
disk to determine the direction the disk is spinning? Where would they
be placed?
Imagine an analog clock set to 12 o'clock. Note that the hour and
minute hands overlap. How many times each day do both the hour and
minute
hands overlap? How would you determine the exact times of the day that
this occurs?
You have two jars, 50 red marbles and 50 blue marbles. A jar will be
picked at random, and then a marble will be picked from the jar.
Placing
all of the marbles in the jars, how can you maximize the chances of a
red marble being picked? What are the exact odds of getting a red
marble
using your scheme?
Pairs of primes separated by a single number are called prime pairs.
Examples are 17 and 19. Prove that the number between a prime pair is
always divisible by 6 (assuming both numbers in the pair are greater
than
6). Now prove that there are no 'prime triples.'
There is a room with a door (closed) and three light bulbs. Outside the
room there are three switches, connected to the bulbs. You may
manipulate the switches as you wish, but once you open the door you
can't
change them. Identify each switch with its bulb.
Suppose you had 8 billiard balls, and one of them was slightly heavier,
but the only way to tell was by putting it on a scale against another.
What's the fewest number of times you'd have to use the scale to find
the heavier ball?
Imagine you are standing in front of a mirror, facing it. Raise your
left hand. Raise your right hand. Look at your reflection. When you
raise
your left hand your reflection raises what appears to be his right
hand. But when you tilt your head up, your reflection does too, and
does
not appear to tilt his/her head down. Why is it that the mirror appears
to reverse left and right, but not up and down?
You have 4 jars of pills. Each pill is a certain weight, except for
contaminated pills contained in one jar, where each pill is weight + 1.
How could you tell which jar had the contaminated pills in just one
measurement?
The SF Chronicle has a word game where all the letters are scrambled up
and you have to figure out what the word is. Imagine that a scrambled
word is 5 characters long:
How many possible solutions are there?
What if we know which 5 letters are being used?
Develop an algorithm to solve the word.
There are 4 women who want to cross a bridge. They all begin on the
same side. You have 17 minutes to get all of them across to the other
side. It is night. There is one flashlight. A maximum of two people can
cross at one time. Any party who crosses, either 1 or 2 people, must
have
the flashlight with them. The flashlight must be walked back and forth,
it cannot be thrown, etc. Each woman walks at a different speed. A pair
must walk together at the rate of the slower woman's pace.
Woman 1: 1 minute to cross
Woman 2: 2 minutes to cross
Woman 3: 5 minutes to cross
Woman 4: 10 minutes to cross
For example if Woman 1 and Woman 4 walk across first, 10 minutes have
elapsed when they get to the other side of the bridge. If Woman 4 then
returns with the flashlight, a total of 20 minutes have passed and you
have failed the mission. What is the order required to get all women
across in 17 minutes? Now, what's the other way?
If you had an infinite supply of water and a 5 quart and 3 quart pail,
how would you measure exactly 4 quarts?
You have a bucket of jelly beans. Some are red, some are blue, and some
green. With your eyes closed, pick out 2 of a like color. How many do
you have to grab to be sure you have 2 of the same?
If you have two buckets, one with red paint and the other with blue
paint, and you take one cup from the blue bucket and poor it into the
red
bucket. Then you take one cup from the red bucket and poor it into the
blue bucket. Which bucket has the highest ratio between red and blue?
Prove it mathematically.
Algorithms
What's the difference between a linked list and an array?
Implement a linked list. Why did you pick the method you did?
Implement an algorithm to sort a linked list. Why did you pick the
method you did? Now do it in O(n) time.
Describe advantages and disadvantages of the various stock sorting
algorithms.
Implement an algorithm to reverse a linked list. Now do it without
recursion.
Implement an algorithm to insert a node into a circular linked list
without traversing it.
Implement an algorithm to sort an array. Why did you pick the method
you did?
Implement an algorithm to do wild card string matching.
Implement strstr() (or some other string library function).
Reverse a string. Optimize for speed. Optimize for space.
Reverse the words in a sentence, i.e. "My name is Chris" becomes "Chris
is name My." Optimize for speed. Optimize for space.
Find a substring. Optimize for speed. Optimize for space.
Compare two strings using O(n) time with constant space.
Suppose you have an array of 1001 integers. The integers are in random
order, but you know each of the integers is between 1 and 1000
(inclusive). In addition, each number appears only once in the array,
except
for one number, which occurs twice. Assume that you can access each
element of the array only once. Describe an algorithm to find the
repeated
number. If you used auxiliary storage in your algorithm, can you find
an
algorithm that does not require it?
Count the number of set bits in a number. Now optimize for speed. Now
optimize for size.
Multiple by 8 without using multiplication or addition. Now do the same
with 7.
Add numbers in base n (not any of the popular ones like 10, 16, 8 or 2
-- I hear that Charles Simonyi, the inventor of Hungarian Notation,
favors -2 when asking this question).
Write routines to read and write a bounded buffer.
Write routines to manage a heap using an existing array.
Implement an algorithm to take an array and return one with only unique
elements in it.
Implement an algorithm that takes two strings as input, and returns the
intersection of the two, with each letter represented at most once. Now
speed it up. Now test it.
Implement an algorithm to print out all files below a given root node.
Given that you are receiving samples from an instrument at a constant
rate, and you have constant storage space, how would you design a
storage algorithm that would allow me to get a representative readout
of
data, no matter when I looked at it? In other words, representative of
the
behavior of the system to date.
How would you find a cycle in a linked list?
Give me an algorithm to shuffle a deck of cards, given that the cards
are stored in an array of ints.
The following asm block performs a common math function, what is it?
cwd xor ax, dx
sub ax, dx
Imagine this scenario:
I/O completion ports are communictaions ports which take handles to
files, sockets, or any other I/O. When a Read or Write is submitted to
them, they cache the data (if necessary), and attempt to take the
request
to completion. Upon error or completion, they call a user-supplied
function to let the users application know that that particular request
has
completed. They work asynchronously, and can process an unlimited
number of simultaneous requests.
Design the implementation and thread models for I/O completion ports.
Remember to take into account multi-processor machines.
Write a function that takes in a string parameter and checks to see
whether or not it is an integer, and if it is then return the integer
value.
Write a function to print all of the permutations of a string.
Implement malloc.
Write a function to print the Fibonacci numbers.
Write a function to copy two strings, A and B. The last few bytes of
string A overlap the first few bytes of string B.
How would you write qsort?
How would you print out the data in a binary tree, level by level,
starting at the top?
Applications
How can computer technology be integrated in an elevator system for a
hundred story office building? How do you optimize for availability?
How
would variation of traffic over a typical work week or floor or time of
day affect this?
How would you implement copy-protection on a control which can be
embedded in a document and duplicated readily via the Internet?
Define a user interface for indenting selected text in a Word document.
Consider selections ranging from a single sentence up through
selections of several pages. Consider selections not currently visible
or only
partially visible. What are the states of the new UI controls? How will
the user know what the controls are for and when to use them?
How would you redesign an ATM?
Suppose we wanted to run a microwave oven from the computer. What kind
of software would you write to do this?
What is the difference between an Ethernet Address and an IP address?
How would you design a coffee-machine for an automobile.
If you could add any feature to Microsoft Word, what would it be?
How would you go about building a keyboard for 1-handed users?
How would you build an alarm clock for deaf people?
Thinkers
How are M&Ms made?
If you had a clock with lots of moving mechanical parts, you took it
apart piece by piece without keeping track of the method of how it was
disassembled, then you put it back together and discovered that 3
important parts were not included; how would you go about reassembling
the
clock?
If you had to learn a new computer language, how would you go about
doing it?
You have been assigned to design Bill Gates bathroom. Naturally, cost
is not a consideration. You may not speak to Bill.
What was the hardest question asked of you so far today?
If MS told you we were willing to invest $5 million in a start up of
your choice, what business would you start? Why?
If you could gather all of the computer manufacturers in the world
together into one room and then tell them one thing that they would be
compelled to do, what would it be?
Explain a scenario for testing a salt shaker.
If you are going to receive an award in 5 years, what is it for and who
is the audience?
How would you explain how to use Microsoft Excel to your grandma?
Why is it that when you turn on the hot water in any hotel, for
example, the hot water comes pouring out almost instantaneously?
Why do you want to work at Microsoft?
Suppose you go home, enter your house/apartment, hit the light switch,
and nothing happens - no light floods the room. What exactly, in order,
are the steps you would take in determining what the problem was?
Interviewer hands you a black pen and says nothing but "This pen is
red."
Post new comment